HPE DL360 G9 2 x E5-2660V3, 128GB RAM, 2 x 300GB, 6x1.2TB Server

Form Factor – one of the following depending on model:

1U Rack form factor

8 SFF Drive Bay Version and 10 SFF Drive Bay Version:

1.7” (4.32cm) Height x 17.11” (43.47cm) Width x 27.5” (69.85cm) Length

4 LFF Drive Bay Version:

1.7” (4.32cm) Height x 17.11” (43.47cm) Width x 29.5” (74.67cm) Length

Processor:

2 processors capable with HPE Smart Socket Guide

Chipset:

IntelC610 Series Chipset

IntelE5-2600v3 Processor Family

IntelE5-2600v4 Processor Family

On System Management Chipset:

HPE iLO (Firmware HPE iL04 2.0 or later) 4GB NAND

Memory – one of the following depending on model:

Type: 

HPE SmartMemory

DDR4 Registered (RDIMM) or Load Reduced (LRDIMM)

DIMM Slots available: 24 (12 DIMM slots per processor, 4 channels per processor, 3 DIMMs per channel)

Maximum Capacity (LRDIMM): 3TB (24 x 128GB LRDIMM)

Maximum Capacity (RDIMM): 768GB (24 x 32GB RDIMM)

Maximum Capacity (NVDIMM): 128GB (16 x 8GB NVDIMM)

Storage Controller – one of the following depending on model:

Entry Models:

HPE Dynamic Smart Array B140i Controller

HPE H240ar Smart Host Bus Adapter

Note: 

For E5 2600v3 Entry models, the embedded B140i will operate in UEFI mode only

For legacy mode support an additional controller will be needed

For Factory integrated models please also select “HP Legacy FIO Mode Setting”, 758959-B22

Note:

The embedded B14Oi defaults to AHCI off the chipset

HP Dynamic Smart Array Controller needs to be enabled on the SATA only models if needed

Base Models:

HPE Flexible Smart Array P440ar/2GB

Performance Models:

HPE Flexible Smart Array P440ar/2GB

Internal Storage Devices – one of the following depending on model:

Optical Drives:

8 SFF with optional Universal Media bay

Option Kit 764632-B21 VGA, SFF DVD-RW USB Kit

Option Kit 818213-B21 VGA, SFF DVD-ROM USB Kit

4 LFF

Option Kit 726536-B21 – HP 9.5mm SATA DVD-ROM Jb Gen9 Kit

Option Kit 726537-B21 – HP 9.5mm SATA Drive DVD-RW Jb Gen9 Kit

Note: Optical cable kit required for optical drivers, 766203-B21

Hard Drives:

None ship standard

Hard Drive Bays:

8 SFF with optional Universal Media Bay or NVMe drive support

4 LFF

10 SFF, 8 SFF Model with optional 2 SFF SAS/SATA kit: 764630-B21

Note: HPE ProLiant360 servers offer both SFF and LFF versions

Note: Pre-configured models come populated with some hard drive blanks.

To order additional (single) hard drive blanks, use either

P/N 666987-B21: HPE SFF Hard Drive Blank Kit or

P/N 666986-B21: HPE LFF Hard Drive Blank Kit

Note: The 25FF kit comes with cable for internal B140i SATA controller.

For SAS an alternate storage controller and cable kit are required.

Maximum Internal Storage Capacity Configuration

Hot Plug SFF SAS SSD 28 4TB 10 x 3.84TB

Hot Plug SFF SATA SSD 38.4TB 10 x 3.84TB

Hot Plug SFF SAS 20.0TB 10 x 2.0TB

Hot Plug SFF SATA 20.0TB 10 x 2.0TB

Hot Plug LFF SAS SSD 6.4TB 4 x 16TB

Hot Plug LFF SATA SSD 15.36TB 4 x 3.84TB

Hot Plug LFF SAS 32.0TB 4 x 8TB

Hot Plug LFF SATA 32.0TB 4 x 8TB

Hot Plug SFF NVMe PCIe SSD 24.96TB 6 x 16TB NVMe + 4 x 3.84TB SFF SSD

Power Supply – one of the following depending on model:

HPE 500W Flex Slot Platinum Hot Plug Power Supply

HPE 800W Flex Slot Platinum Hot Plug Power Supply

HPE 1400W Flex Slot Platinum Plus Hot Plug Power Supply

HPE Flexible Slot Battery Backup Unit Kits

Note: HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen9 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to “right-size” a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid “trapped” power capacity in the data center.

System Fans – one of the following depending on the model:

1P model Non-redundant: N/A Redundant: 5 fans

2P model Non-redundant: N/A Redundant: 7 fans

Note: The second processor option kit contains two fans.

Note: High Performance Fan Kit, 766201-B21, is available to meet some extended ambient operating temperatures above 35° C. 

Interfaces

Serial 1

Note: Serial Cable Option Kit: 764646-B21

Video 1 rear (standard)

1 front (optional)

Note: Front VGA options available for 8SFF and 4LFF models.

Network RJ-45 (Ethernet) Embedded 4x1GBE + FlexibleLOM bay

HPE iLO Remote Management 1Gb Dedicated

Network Port

SD Connector 1 micro SD Internal

Note: The SD slot is not a hot-pluggable device. Customers should not attempt to plug an SD card into the SD slot while the server is powered.

USB 3.0 5 total: 2 rear, 1 front, 2 internal

Operating Systems and Virtualization Software Support for ProLiant Servers

Microsoft Windows Server

Red Hot Enterprise Linux (RHEL)

SUSE Linux Enterprise Server (SLES)

Canonical Ubuntu

Oracle Linux

CentOS

VMware

Citrix XenServer

Oracle Solaris

Wind River Linux

Upgradeability

Upgradeable to 2 processors (44 Cores)

Up to 24 DIMM slots available for higher Memory capacity

Up to 10 SFF Hard Drive Bays or 4 LFF Hard Drive Bays

FlexibleLOM slot for 1GbeE or 10GBE or QDR/FDR InfiniBand Networking Options

3 PCIe 3.0 I/O slots for additional communications and storage expansion

Note: Slot 1 and 2 Riser Shipped Standard, Slot 3 Optional 1 FH, ¾ length and 2 Low Profile slots available or two FH, ¼ length slots.

Redundant Power Supplies

Optical Drive supported via Universal Media Bay

8SFF Chassis with:

Option Kit 764632-B21 VGA, SFF DVD-RW USB Kit

Option Kit 718213-B21 VGA, SFF DVD-ROM USB Kit

4LFF Chassis with:

Option Kit 826536-B21 – HP 9.5mm SATA DVD-ROM Jb Gen9 Kit

Option Kit 726537-B21 – HP 9.5mm SATA DVD-RW Jb Gen 9 Kit

Note: Optical cable kit required for optical drivers, 766203-B21

Graphics

Integrated Matrox G200 video standard

1280 x 1024 (32 bpp)

1920 x 1200 (16 bpp)