HP ProLiant DL580 G9 Server Specification
Chipset:
Intel C602J Chipset
Intel Xeon E7-4800/8800v3 Processor Family
Intel Xeon E7-4800/8800v4 Processor Family
On System Management Chipset
HPE iLO (Firmware HPE iLO4 2.0) 4GB NAND
Memory: One of the following depending on model
Type:
HPE SmartMemory
DDR4 Registered (RDIMM) and Quad Rank Load Reduced (LRDIMM)
DIMM Slots Available 96
Maximum Capacity 12TB (96 x 128GB)
NOTE: Hewlett Packard Enterprise memory from previous generation servers are not qualified with this HPE ProLiant Server.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1866MHz, 1600MHz, or 1333MHz
Network Controller FlexibleLOM:
HPE ProLiant Gen9 servers offer a new flexible network technology - FlexibleLOMs, which offers customers a choice of 1Gb, 10Gb, or 10Gb base-T Ethernet or converged networking in their embedded adapter:
HPE Ethernet 1Gb 4-port 331FLR FIO Adapter
HPE Ethernet 1Gb 4-port 366FLR FIO Adapter
HPE FlexFabric 10Gb 2-port 533FLR-T FIO Adapter
HPE FlexFabric 10Gb 2-port 534FLR-SFP+ FIO Adapter
HPE Ethernet 10Gb 2-port 546FLR-SFP+ FIO Adapter
HPE FlexFabric 10Gb 2-port 556FLR-SFP+FIO Adapter
HPE FlexFabric 10Gb 2-port 556FLR-T FIO Adapter
HPE Ethernet 10Gb 2-port 560FLR-SFP+ FIO Adapter
HPE Ethernet 10Gb 2-port 561FLR-T FIO Adapter
HPE Ethernet 10Gb 2-port 562FLR-SFP+FIO Adapter
Internal Storage Devices:
Hard Disk Drive Backplane:
Internal SAS lower and upper backplanes support up to ten SFF hard disk drives or solid state drives or Express Bays (NVMe drives)
Diskette Drive
None
Optional Optical Drive
External
Hard Drives
None
Maximum Internal Storage:
Hot Plug SFF SAS 24TB 10 x 2.4TB
Hot Plug SFF SAS SSD 38.4TB 10 x 3.84TB
Hot Plug SFF SATA SSD 38.4TB 10 x 3.84TB
Hot Plug SFF NVMe PCIe SSD 8TB 5 x 1.6TB
NOTE: Optional support for 5 NVMe SSDs or 5 SFF drives are also available.
Power Supply:
HPE 1500W Common Slot Platinum Plus Hot Plug Power Supply
HPE 1500W Common Slot 48VDC Hot Plug Power Supply
NOTE: 1500W power supply supports high line voltage only.
HPE 1200W Common Slot Platinum Plus Hot Plug Power Supply
NOTE: A minimum of two (2) power supplies are required. Four (4) 1500W power supplies offers N+N redundancy for highly loaded configurations
System Fans:
4 Hot Plug Fans (eight rotors with N+1 redundancy)
Interfaces:
Serial
1 back
Video
1 front; 1 back
FlexibleLOM Network Ports
Selection of FlexibleLOM options
iLO 4 Remote Management
1 x 1Gbe dedicated
Micro SD Slot
1 internal
NOTE: Dual microSD USB option kit also available (741279-B21)
USB 2.0 Ports
8 total: 2 front; 4 back; 2 internal
Operating Systems and Virtualization Software Support for ProLiant Servers:
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
CentOS
Oracle Linux
Upgradability:
Upgradeable to 4 processors
Up to 96 DDR4 DIMM slots
9 PCIe Gen3 expansion slots
NOTE: PCIe slot availability is dependent on the number of processors installed.
Standard Features:
10 SFF internal HDD/SSD SAS drive bays or 5 SFF Internal Express Bays + 5 SFF Internal HDD/SSD drive bays
NOTE: Five drive bays come standard. An optional five SAS drive or five Express backplane kit with five drive bays can be ordered for ten drives.
5 NVMe SSD drive bays
4 redundant hot-plug power supplies
Graphics:
Integrated Matrox G200 video standard
• 16 MB Flash
• 256 MB DDR 3 with ECC (112 MB after ECC and video)
HPE iLO 4 On System Management Memory
• 16 MB Flash
• 256 MB DDR 3 with ECC (112 MB after ECC and video)
NOTE: PCIe slot availability is dependent on the number of processors installed.
NOTE: A minimum of two processors are required. The system may have three or four processors installed.
NOTE: A minimum of two memory cartridges are required (one per processor).
NOTE: A minimum of two memory DIMMs are required per cartridge (minimum of four DIMMs per server).
NOTE: A minimum of two power supplies are required.