Questions? Feedback? powered by Olark live chat software

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

HPE HP BL460c G8 (2) E5-2670 2.6GHz 8C CPU 16GB RAM (1)x 100GB 2.5" SSD SATA 554FLB FIO Base Server Bundle

SKU:
BL460cG8BUN1
Condition:
Used
$2,093.99
Write a Review

Used HPE HP BL460c G8 (2) E5-2670 2.6GHz 8C CPU 16GB RAM (1)x 100GB 2.5" SSD SATA 554FLB FIO Base Server Bundle
 

Feature:

HP ProLiant BL460c Generation 8 (G8)

Cache Memory (one of the following depending on model):

30MB (1x30MB) L3 cache

NOTE: For Twelve-core processors.

25MB (1x25MB) L3 cache

NOTE: For Six, Eight or Ten-core processors.

20MB (1x20MB) L3 cache

NOTE: For Eight-core processors.

15MB (1x15MB) L3 cache

NOTE: For Quad or Six-core processors.

10MB (1x10MB) L3 cache

NOTE: For Quad-core processors.

5MB (1x5MB) Level 3 cache

NOTE: For Dual-core processors.

Chipset:

Intel® C600 Series Chipset

Intel® E5-2600 and 2600v2 Processor Families

Upgradeability:

Upgradeable to two (2) processors

NOTE: Processor upgrade available from Intel® Xeon® Processors E5-2600 to E5-2600 v2.

On System Management Chipset:

HP iLO (Firmware: HP iLO 4)

Memory Protection:

Advanced ECC

Memory Online Spare Mode (Rank Spare Mode)

Lockstep Mode

Memory (one of the following depending on model):

Type:   HP SmartMemory DDR3 Load Reduced (LRDIMM), Registered (RDIMM), or Unbuffered ECC (UDIMM)

Standard (Pre-configured Models):

64GB (8 x 8GB) DDR3 1600MHz RDIMMs at 1.5V

64GB (4 x 16GB) DDR3 1866MHz RDIMMs at 1.5V

32GB (4 x 8GB) DDR3 1600MHz RDIMMs at 1.5V

32GB (2 x 16GB) DDR3 1866MHz RDIMMs at 1.5V

32GB (4 x 8GB) DDR3 1333MHz RDIMMs at 1.35V

32GB (2 x 16GB) DDR3 1600MHz RDIMMs at 1.35V

16GB (2 x 8GB) DDR3 1866MHz RDIMMs at 1.5V

16GB (4 x 4GB) DDR3 1333MHz RDIMMs at 1.35V

16GB (2 x 8GB) DDR3 1600MHz RDIMMs at 1.35V

Maximum (LRDIMM):  

512GB (16 x 32GB) up to 1333MHz at 1.35V

Maximum (RDIMM):

256GB (16 x 16GB) up to 1866MHz at 1.5V 384GB (16 x 24GB) up to 1333MHz at 1.35V

Maximum (UDIMM):

128GB (16 x 8GB) up to 1600MHz at 1.5v

NOTE: HP memory from previous generation servers are not qualified or warranted with this server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen8.

NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM.

NOTE: The internal USB 2.0 Port is not available when the HP 24GB (1x24GB) Three Rank x4 PC3L10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kits (700404-B21) are used.

NOTE: The Intel Xeon E5-2600 Processor Family cannot be configured with the new 1866MHz HP Smart Memory or the new 1600MHz Low Voltage (1.35v) HP Smart Memory.

NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1866MHz, 1600MHz, 1333MHz, or 1066MHz.

Network Controller:

One (1) HP FlexFabric 10Gb 2-port 534FLB FlexibleLOM, HP FlexFabric 10Gb 2-port 554FLB FlexibleLOM, or HP FlexFabric 20Gb 2-port 630FLB FlexibleLOM

NOTE: Supports FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, iSCSI boot, and autosensing 20Gb/10Gb/1Gb Ethernet.

NOTE: Each port is autosensing 1Gb/10Gb/20Gb, and can interoperate with 1Gb HP BladeSystem cClass interconnect components. Both ports will operate at the same speed.

NOTE: FlexFabric capabilities require the use of an HP Virtual Connect FlexFabric module. Fibre Channel over Ethernet (FCoE) is supported with the HP 10GbE Pass-Thru Module, HP 6120XG Blade Switch with the CEE license installed, HP Cisco B22HP Fabric Extender and HP Cisco B22HP Fabric Extender with 16 FET for BladeSystem c-Class

One (1) HP Flex-10 10Gb 2-port 530FLB FlexibleLOM

One (1) HP Ethernet 10Gb 2-port 560FLB FlexibleLOM

NOTE: FlexibleLOMs are not compatible with prior generation c-Class server blades

Standard iLO Network Controller:

One (1) 10/100 Mbps port for the HP iLO 4 to Onboard Administrator link. The Onboard Administrator (with 10/100/1000 Mbps) to BladeSystem link is 1Gbps

Expansion Slots:

Two (2) I/O expansion mezzanine slots:

x16 PCIe 3.0 Type A (supports Type A mezzanine cards) (expansion slot 1).

NOTE: This expansion slot supports dual-port mezzanine cards: one port is routed to interconnect module bay 3 and the other to bay 4.

x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2).

NOTE: This expansion slot supports dual-port and quad-port mezzanine cards. For dual-port cards, one port is routed to interconnect module bay 5 and the other to bay 6. For quad-port cards, one port is routed to interconnect module bay 5, one to bay 6, one to bay 7, and one to bay 8.

NOTE: A second processor must be installed (in processor slot 2) to have access to the second expansion slot (expansion slot 2).

Mezzanine card options include:

Dual-port 10Gb FlexFabric, Dual-port 20Gb FlexFabric, 10Gb Flex-10, 10GbE options, and quad-port 1Gb Ethernet server adapter mezzanine options for additional network ports.

Dual-port 8Gb and 16Gb Fibre Channel HBA for SAN connectivity.

QDR and FDR InfiniBand for low latency and high bandwidth server interconnectivity.

I/O accelerator mezzanine options for high transaction rate local storage

HP Server ROM:

HP ROM (read only memory) is now digitally signed using HP's Corporate Signing Service. This signature is verified before the flash process starts, reducing accidental programming and preventing malicious efforts to corrupt system ROM.

HP ROM provides for essential initialization and validation of hardware components before control is passed to the customer-installed operating system. The ROM also provides the capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.

HP ROM performs very early configuration of the video controller, to allow monitoring of initialization progress via an attached monitor. If configuration or hardware errors are discovered during this early phase of hardware initialization, suitable messages are now displayed on the connected monitor. Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in diagnosis.

HP's ProLiant ROM is used to configure the following:

  Processor and chipset status registers

  System memory, memory map, and memory initialization

  System hardware configuration (integrated PCI devices and optional PCIe cards).

  Customer-specific BIOS configuration using the HP ROM-Based Setup Utility (RBSU).

Storage Controller:

All BTO Models:

One (1) HP Smart Array P220i Controller with 512MB Flash-Backed Write Cache (FBWC) supporting RAID 0 and RAID 1.

NOTE: Upgradeable firmware with recovery ROM.

NOTE: The HP Smart Array P220i supports two (2) small form factor (SFF) hot plug drive bays.

NOTE: The server supports up to a combined total of two (2) FBWC supercap options.

NOTE: The HP Smart Array P220i Controller FIO Kit (690164-B21) comes included with the HP ProLiant BL460c Gen8 10Gb FlexibleLOM Configureto-order Blade Server (641016-B21). However when choosing the HP ProLiant BL460c Gen8 E5-v2 10Gb FlexibleLOM Configure-to-order Blade Server (735151-B21), the HP Smart Array P220i Controller FIO Kit (690164- B21) must be added separately as part of the Server Blade Configuration Process.

Maximum Internal Storage (one of the following depending on model):

Hot Plug SFF SAS 2.4TB 2 x 1.2TB

Hot Plug SFF SATA 2.0TB 2 x 1.0TB

Hot Plug SFF SAS SSD 1.6TB 2 x 800GB

Hot Plug SFF SATA SSD 1.6TB 2x800GB

NOTE: The ProLiant BL460c Gen8 server includes the new HP hot plug small form factor (SFF)

SmartDrive carrier for enhanced management and reduced maintenance errors. HP drives from previous generation servers are not compatible with the ProLiant BL460c Gen8 drive bays.

Interfaces:

Micro SDHC Slot:  One (1) internal Micro Secure Digital High Capacity (Micro SDHC) card slot

USB 2.0 Port: One (1) internal USB 2.0 connector for USB flash media drive keys

NOTE: The above options are for integrated hypervisor virtualization environments needing a low cost boot solution with the highest performance and reliability.

NOTE: The internal USB 2.0 Port is not available when the HP 24GB (1x24GB) Three Rank x4 PC3L10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kits (700404-B21) are used.

Industry Standard Compliance:

ACPI 2.0

Microsoft® Logo certifications

USB 2.0 Support

IPMI 2.0

Secure Digital 2.0

TPM 1.2 Support

IEEE (specific IEEE standards depending on Ethernet adapter card(s) installed)

Advanced Encryption Standard (AES)

Triple Data Encryption Standard (3DES)

SNMP

SSL 2.0

DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)

Active Directory v1.0

PCIe 3.0

Operating Systems and Virtualization Software Support for ProLiant Servers:

Microsoft Windows Server

Red Hat Enterprise Linux (RHEL)

SUSE Linux Enterprise Server (SLES)

Canonical Ubuntu

Oracle Solaris

VMware

Citrix XenServer

Enclosures:

HP offers two different c-Class server blade enclosures to meet your individual needs:

The HP BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16) ProLiant BL460c Gen8 servers plugged vertically.

The HP BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HP ProLiant BL460c Gen8 servers plugged horizontally.

Server blades, storage blades, interconnect modules, power supplies, fans, and redundant Onboard Administrator modules are all designed to fit into the c3000 and c7000 enclosures.

Graphics:

Integrated Matrox G200 video standard

    1280 x 1024 (32 bpp)

    1920 x 1200 (16 bpp) HP

iLO 4 On System Management Memory

    16 MB Flash Video Memory

    256 MB DDR 3 with ECC (112 MB after ECC and video)

Form Factor:

HP ProLiant BL460c Gen8 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures.

Security:

Power-on password

Administrator's password

Keyboard password (QuickLock)

HP iLO 4 On System Management Chipset with:

    SSL encryption

    Secure Shell version 2

    Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser, CLP and XML scripting interface

    AES and RC4 encryption of video

External USB port enable/disable

Network server mode

Serial interface control

TPM (Trusted Platform Module) 1.2 option

Advanced Encryption Standard (AES)

Intel® Advanced Encryption Standard-New Instructions (AES-NI)

  • Manufacturer: Hewlett Packard
  • Type: Server Bundle
  • Model: BL460cG8
  • Processor: (2) E5-2670 2.60GHz 8C CPU
  • Memory: 16GB PC3-12800R SDRAM DIMM; Supports up to 384GB
  • Network Controller: (1) FlexFabric 10Gb 2-port 554FLB FIO Adapter
  • Storage Controller: (1) Smart Array P410i RAID
  • Expansion Slots: (2)
  • Storage : (1)x 100GB 3Gbps SATA 2.5" Solid State Drive
  • Form Factor: Half-height

Not the exact configuration you’re looking for? Contact Us for a custom configuration!